Features

KDS-3C is high-speed analyzer of three-channel photoelectric colorimetry method used for elements analysis featuring multi-function and easier operation. Each channel can directly read concentration without conversion, just push “PRINGT” to get test result. Each channel of the analyzer can store five different tested curves. It is convenient to pick out several curves to inspect. The analyzer is suitable to elements’ colorimetry analysis of metals, non-metals and ores, and has been widely used in the metallurgy, mechanical and chemical industry.

 

Technical Parameters:

(1)   Wave Length Range: 400-750 nm ( ray filter)

(2)   Absorbance Range: 0-2 A

(3)   Concentration Range: 0.000 – 9.999% 10.00-99.99% automatic shift display

(4)   Reproducibility: better than 0.003 A (0.5A)

(5)   Push Key: touch thin-film keyboard, 16 keys, beep tone

(6)   Display: 5-digit LED numeral display ( 1 digit for indicator, 4 digits for valid figure, automatic decimal

point conversion, three channels respectively show 3x5 digit)

(7)   Data Storage: E2PRROM, power cut-off data can be stored for a number of years.

(8)   Power Supply: AC 220V ±10%, suggested to use high-precision electr AC voltage stabilizer

(9)   Power Consumption: ≤50 KW

(10) Outside Measurement: 580x280x230 (mm)

(11) Weight: 15 KG

 

Measuring Range

Si、Mn、P、Cr、Fe、Ni、Mo、Cu、Sn、Pb、Ti、Al、W、Mg、Cd、Zn etc, the range can be expanded by way of measuring methods.

 

Measuring Method, Speed & Precision

Off-machine fusion, built-in colorimetry method, colorimetry time about 3 seconds, precision is accordance with GB223.3-5-1988 Standard.